Spyderco PM2 Copper – Shipwreck Patina – Goonies Map – Laser Engraved Scales – EDC Gear – Hardware & Knife Install Options

Spyderco PM2 COPPER SCALES WITH SHIPWRECK PATINA FOR THE ULTIMATE GOONIES FANS!

We now offer multiple options when you buy one of our PM2 scales:
– Buy the engraved scales only
– Add the Ti hardware kit with the scales to install yourself
– Choose the black blade complete knife with scales installed (comes with original black hardware, you will not receive the original G10 scales)
– Choose the satin blade complete knife with scales installed & Ti hardware kit (you will not receive the original hardware or G10 scales if you select the installed option)

***NOT COMPATIBLE WITH CRUWEAR MODELS***

DEEP ENGRAVED detailed design featuring a section of the infamous One-Eyed Willy’s Treasure Map. With a one-of-a-kind shipwreck patina finish, each patina result is unique. A clear coat is applied to seal and preserve the look. Scales are engraved using one of the many fiber lasers in our shop.

Flytanium precision milled for Spyderco paramilitary 2. Antique stonewash finish copper construction. They are 4.75” overall and weigh 3.67oz. No hardware to tools are included, must use original hardware for assembly unless you order the hardware kit option.

NOTE: THE SCALES YOU RECEIVE MAY LOOK DIFFERENT THAN THE STOCK PHOTO. These are one of a kind finishes, some have more green or blue than others as well as varying shades of green and blue.

NOTE: THE SCALES YOU RECEIVE MAY LOOK DIFFERENT THAN THE STOCK PHOTO. These are one-of-a-kind finishes; some are bluer than others as well as varying shades of blue.

***Shipwreck Patina Finish***
The shipwreck patina will naturally change based on usage, it is like a living finish that will continue to evolve due to dirt and oils on your hand and in the environment. I do apply a clear coat to seal the patina before engraving the scales, but you can do an additional clear coat to double up on it. Any clear coat will work and you can apply as often as you want.

There are many small parts and pieces on the Para 2. It is NOT easy to take apart. Disassemble at your own risk. Also keep in mind that almost every knife manufacturer provides a list of specific actions that could void the manufacturer’s warranty.

**Both Black and Satin blade options are made with CPM S45VM blade steel.

**Titanium Hardware kit includes everything you need to replace all visible hardware on your PM2: Pivot Screws, Body Screws, Pocket Clip Screws, Threaded Stop Barrel, Barrel Spacer, and Lanyard Tube. Kit will not include a pivot barrel replacement.

Installation of the hardware kit requires some basic tools and knowledge, the pivot can be tough to remove. Titanium screws require a little finesse as they are not as strong as steel screws, high quality torx bits are recommended to ensure the best experience.

Hardware kits are not made here, these are Flytanium brand, and we are not responsible if you are unable to properly install them on your knife. We personally have assembled many kits with no issues, we will not accept returns on hardware kits after you have attempted to install them.