Spyderco Delica Brass Scales
You can choose to buy just the scales themselves, or buy them installed on a new Delica knife.
If you buy the complete knife, you will also receive all these upgrades as shown in the photos:
– Titanium Hardware set
– Brass Backspacer (hand polished to match the scales)
– LynchNW Deep Carry Clip (satin)
Brass scales with paisley leaf relief engraving! After 100’s of passes under the laser they undergo multiple polishing steps to give you plenty of 3D depth and smooth feel.
Flytanium precision milled scales are a perfect fit to replace the standard scales. The backs have been milled out to receive the nested liners. Includes pocket clip holes for tip-up, right hand carry.
Not compatible with Lightweight model.
Scales Specs:
Material: Brass
Weight: 3.7oz
If you purchase just the scales, you need to use the hardware from your stock knife for your own assembly.
Knife Specs:
Overall Length – 7.15″ (182mm)
Blade Length – 2.90″ (74mm)
Blade Steel – VG-10
Closed Length – 4.25″ (108mm)
Edge Length – 2.56″ (65mm)
Weight (before scale upgrade) – 2.4oz (68g)
Blade Thickness – 0.098″ (2.5mm)
Carry Position – Tip Up Right Hand Carry
Lock Type – Back Lock
Grind – Full-Flat
*Installation of the scales requires some basic tools and knowledge. You will need a high quality torx bit set to remove the screws and pivots. The pivot can be tough to remove. There are some good informational videos on YouTube if you need more instructions.
Disclaimer: There are many small parts and pieces on the Delica. It is NOT easy to take apart. Disassemble at your own risk.
*Please Note: Spyderco’s Warranty does not cover disassembly of any knife by any person other than Spyderco’s Warranty department.
Reviews
There are no reviews yet.