Spyderco PM3 – Titanium Scales Hardware Kit – Flytanium

See our full selection of FLYTANIUM GEAR on our website:
https://www.dnalasering.com/product-category/aftermarket/

Flytanium Ti hardware kits! Spyderco PM3

Hardware kit includes everything you need to replace all visible hardware on your knife: Pivot Screws, Body Screws, Pocket Clip Screws, Stop Pin, Barrel Spacer, and Lanyard Tube. The only stock piece this kit won’t replace is the pivot barrel – steel performs better than titanium for this part and you definitely want to keep that drop-shut action! This hardware kit weighs about 0.11 oz.

Please note this kit is not compatible with the lightweight model!

Titanium screws are a great way to upgrade the look of your knife, however they do require a little finesse as they are not as strong as steel screws, and may break if too much pressure is applied during installation. We recommend using high quality torx bits to ensure the best experience.

*Installation of the hardware kit requires some basic tools and knowledge. You will need a high quality torx bit set to remove the screws and pivots. The pivot can be tough to remove. There are some good informational videos on YouTube if you need more instructions or email us.

Disclaimer: There are many small parts and pieces on the Para3. It is NOT easy to take apart. Disassemble at your own risk.

*Please Note: Spyderco’s Warranty does not cover disassembly of any knife by any person other than Spyderco’s Warranty department.