Spyderco PM2 Copper – Shipwreck Patina – PM2 Copper Scales – EDC Gear – Hardware & Knife Install Options

SPYDERCO PM2 COPPER SCALES WITH SHIPWRECK PATINA

***These scales are NOT compatible with CRUWEAR pm2 knives, due to the full liners. Only compatible with models using nested liners.

A one of a kind shipwreck patina finish, with varying shades of green and blue. Clear coat is applied to seal and preserve the look. Note that we strive to add as much blue as possible because these scales are also used to engrave with and creates a better contrast with as much blue as possible.

Flytanium precision milled for Spyderco paramilitary 2. Antique stonewash finish copper construction. They are 4.75” overall and weigh 3.67oz. No hardware to tools are included, must use original hardware for assembly unless you order the hardware kit option.

NOTE: THE SCALES YOU RECEIVE MAY LOOK DIFFERENT THAN THE STOCK PHOTO. These are one of a kind finishes, some have more green or blue than others as well as varying shades of green and blue.

***Shipwreck Patina Finish Maintenance***
The shipwreck patina will naturally change based on usage, it is like a living finish that will continue to evolve due to dirt and oils on your hand and in the environment. I do apply a clear coat to seal the patina before engraving the scales, but you can do an additional clear coat to double up on it. Any clear coat will work and you can apply as often as you want.

Measurements:
4.75″ Overall
1/8″ Thick
3.67oz

There are many small parts and pieces on the Para 2. It is NOT easy to take apart. Disassemble at your own risk. Also keep in mind that almost every knife manufacturer provides a list of specific actions that could void the manufacturer’s warranty.

**Both Black and Satin blade options are made with CPM S45VM blade steel.

**Titanium Hardware kit includes everything you need to replace all visible hardware on your PM2: Pivot Screws, Body Screws, Pocket Clip Screws, Threaded Stop Barrel, Barrel Spacer, and Lanyard Tube. Kit will not include a pivot barrel replacement.

Installation of the hardware kit requires some basic tools and knowledge, the pivot can be tough to remove. Titanium screws require a little finesse as they are not as strong as steel screws, high quality torx bits are recommended to ensure the best experience.

Hardware kits are not made here, these are Flytanium brand, and we are not responsible if you are unable to properly install them on your knife. We personally have assembled many kits with no issues, we will not accept returns on hardware kits after you have attempted to install them.

TO SEE MORE OF OUR PRODUCTS VISIT OUR WEBSITE AT DNALASERING.COM